Wall-Mount Pegboard Panels & Frame – Assembly Guide
Thank you for choosing Decstuff. Our wall-mount pegboard system is designed for a clean, strong, and modular installation experience. Follow the steps below to assemble and install your pegboard mounting frame and attach your pegboard panels securely.
Need to achieve this
To keep assembly clean and safe
This is a important step to avoid damage a connecting bridges, to insure you can start with vertically connecting this help you to properly alignment.
Circle = Circle
Square = Square
Triangle = Triangle
Using this signs connect 3 vertical group of frames
To insert this bridge, you need to applies some pressure in all bridges to align properly. Apply uniform pressure to all bridges during the insertion process for proper alignment.
You can now install all pegboard panels by screws.
Attach the Pegboard Panels
Place your pegboard panels onto the mounted frame, align the pegboard’s holes with the frame’s support channels, ensure all sides of the panel sit flush with the frame.
These numbers represent the main mount holes (1,2,3,4,5,6) for wall installation, while the remaining numbers (7,8,9,10) are optional.
If you mounting heavy items on pegboard then you can add more screws Consider using additional screws when mounting heavier items on pegboard for added support.
Thanks For Purchasing our product We appreciate your purchase of our product and are confident it will meet your expectations.